Products Catalog

0-pcs, Login for Price

400-Series (1-3/4 X 4 Center Glaze for 1/4 Glazing)

Details Info

Installations Instructions

Structural Test Reports

Hurricane Impact Test Reports

Storefront Stock Lengths

Aluminum Doors


The 400 Series (1-3/4 x 4 system) is an economical systems designed to efficiently meet industry standard performance requirements, all the systems components are designed to allow interchangeability making them ideal for either exterior and interior applications. This series are industry standard center glazed systems that receive all standard entrance door hardware and doors types with single or double action door hardware.

This system will receive ¼ glass in a ½ glass pocket width and can be shop of filed fabricated. The extrusions can be reinforced to meet more rigorous performance requirement.

  • All framing sections shall be extruded from 6063-T5 aluminum alloy
  • All glazing beads shall be NS (non-stretch, high-shore) vinyl used on both sides of the glass. Vinyl shall incorporate a fiberglass cord bonded with the vinyl
  • Sections shall conform to details and shall present clean, straight, sharply defined lines, and shall be free from defects impairing strength or durability
  • All screws, nuts, bolts and fastening devices and internal components shall be of aluminum, stainless steel or other non-corrosive material
Storefront components shall be installed in openings properly prepared. They shall be set plumb, square and level in exact alignment with surrounding work All joints between metal and masonry shall be fully caulked and field tested to resist water leakage with provisions taken to drain infiltrated water
Extrusions shall be free of scratches and other blemishes. Aluminum shall be given an Architectural class II (class I is available upon request) protective anodic coating that conforms to industry specification standards (/Clear, Bronze) in (specify one) clear or bronze colors, others are available upon request.Consult PRL Aluminum for details.
All factory preparation from detail drawings shall be so fabricated that field assembly will be able to produce accurate, tightly fitted joint

Copyright © 2013 PRL Glass Systems Inc. All rights reserved. Use of this website signifies your agreement to the Terms of Sale
PRL Glass Systems Inc,

13644 Nelson Ave, City of Industry, CA. 91746

• Ph:- 800-433-7044 • Fx:- 626-968-9256
PRL Aluminum Architectural Products,

14760 Don Julian Rd, City of Industry, CA. 91746

• Ph:- 877-775-2586 • Fx:- 877-274-8800